Hoshizaki REFRIGERATED PREP TABLE WITH RAISED RAIL 73168 User Manual download pdf (Page 56)

2. Condenser Fan Motor

1)Openthefrontpanel.Movethepowerswitchtothe"OFF"position,thenunplugthe

unit.

2) Remove the left side panel.

3) Disconnect the fan motor wires.

4) Remove the condenser fan motor assembly bolts, then remove the condenser fan

motor assembly. See Fig. 10.

5) Remove the fan motor from the fan motor bracket and remove the fan blade from the

fan motor.

6) Place the fan blade on the new fan motor, then install the new fan motor.

7) Replace the fan motor assembly in its correct position.

8) Connect the fan motor wires.

9) Replace the panels in their correct positions.

10)Plugintheunit,thenmovethepowerswitchtothe"ON"positiontostarttheunit's

cooling process.

Condenser Fan

Motor Bracket

Condenser Fan Motor

Condenser Fan Blade

Condenser

Fig. 10

3. Rail Fan Motor

1)Openthefrontpanel.Movethepowerswitchtothe"OFF"position,thenunplugthe

unit.

2) Remove the storage pans from the rail area. If wet, dry the rail area with a dry cloth.

3) Remove the rail fan motor shroud. See Fig. 11.

4)Disconnecttherailfanmotorleadwiresatleast6"(15cm)fromthefanmotor.Remove

the rail fan motor and bracket.

5) Remove the rail fan motor bracket from the old rail fan motor and place on the new rail

fan motor.

6) Secure the new fan motor wires to the old fan motor wires in the rail area. DO NOT cut

the new fan motor wires.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 65 66

No comments

Hoshizaki REFRIGERATED PREP TABLE WITH RAISED RAIL 73168 User Manual Page 56