Hoshizaki KM-101BAH User Manual download pdf (Page 19)

16) Wash the Bin Control Switch, Water Tank, Float Switch, Cube Guide, Silicone Hose

and Overﬂow Pipe by using a nylon scouring pad, brushes and the cleaning solution.

In addition to the removed parts, also wash the bin liner and Bracket (L) (R) with the

solution.

17) Discard the cleaning solution and rinse the parts thoroughly with water.

2. Sanitizing Procedure - Following Cleaning Procedure

1) Dilute approximately 0.5 ﬂ. oz. (15 ml or 1 tbs) of a 5.25% sodium hypochlorite solution

(chlorine bleach) with 1 gallon (3.8 lit.) of warm water. Using a chlorine test strip or

other method, conﬁrm that you have a concentration of about 200 ppm.

2) Soak the removed parts from step 16 above in a clean container containing the

sanitizing solution. After allowing the parts to soak for 10 minutes, wash them with the

solution. Also wash the bin liner, Bracket (L) (R) with the solution.

Fig. 8

Cube Guide

* This illustration shows KM-61BAH.

The following number of Cube

Guides are provided:

KM-61BAH 2 pcs

KM-101BAH 3 pcs

KM-151BAH 3 pcs

KM-151BWH 3 pcs

Snap

Water Tank

Bin Control Switch

* The Bin Control Switch is accessible by

removing the Water Tank. Pull the switch

towards you for easy maintenance.

* This is the front view with the Door opened

and the Water Tank removed.

1 2 ... 14 15 16 17 18 19 20 21 22

No comments

Hoshizaki KM-101BAH User Manual Page 19