Hoshizaki KM-101BAH User Manual download pdf (Page 16)

H. Startup

CAUTION

1. All parts are factory-adjusted. Improper adjustments may result in failure.

2. If the unit is turned off, wait for at least 3 minutes before restarting the

icemaker to prevent damage to the Compressor.

* Check that shipping tape(s), string and packing are removed before starting the icemaker.

1) Open the Water Supply Line Shut-off Valve.

2) Remove the Air Filter.

3) Move the Control Switch on the Control Box to the “ICE” position.

4) Let the icemaker run for 10 minutes, then move the Control Switch to the “OFF”

position.

5) Open the Door.

6) Disconnect the Silicone Hose to drain the water. See Fig. 6.

7) Reconnect the Silicone Hose back in its correct position after all of the water has

drained.

8) Clean inside the Storage Bin and Door.

9) Move the Control Switch to the “ICE” position. This starts the automatic icemaking

process.

10) Close the Door.

11) Place the Air Filter in its

correct position.

Fig. 6

Cube Guide

Water Tank

Silicone Hose

(Connect/disconnect

arrowed part)

Overﬂow Pipe

(Disconnect from tank

bottom)

Storage Bin

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Hoshizaki KM-101BAH User Manual Page 16