Hoshizaki KM-101BAH User Manual download pdf (Page 21)

3. Air Filter

The plastic mesh Air Filter removes dirt or dust from the air, and keeps the Condenser from

getting clogged. As the ﬁlter gets clogged, the icemaker’s performance will be reduced.

Check the ﬁlter at least twice a month. When it is clogged, use warm water and a neutral

cleaner to wash the ﬁlter.

4. Condenser

Check the Condenser once a year, and clean if required by using a brush or vacuum

cleaner. More frequent cleaning may be required depending on the location of the

icemaker.

C. Preparing the Icemaker for Long Storage

IMPORTANT

When shutting off the icemaker for an extended time, drain out all water from

the water lines and remove the ice from the Storage Bin. The Storage Bin

should be cleaned and dried. Drain the icemaker using air or carbon dioxide

to prevent damage to the water supply lines at sub-freezing temperatures.

Shut off the icemaker until the proper ambient temperature is resumed.

When the icemaker is not used for two or three days, it is sufficient to only move

the Control Switch to the “OFF” position, unless the icemaker will be at sub-freezing

temperatures.

1. Remove the water from the potable water supply line:

1) Remove the Air Filter if it has not already been removed.

2) Move the Control Switch on the Control Box to the “OFF” position.

3) Wait 3 minutes.

4) Close the potable water supply line Shut-off Valve and open the potable water supply

line Drain Valve. See Figs. 4 and 5.

5) Allow the line to drain by gravity.

6) Attach compressed air or carbon dioxide supply to the potable water supply line Drain

Valve.

7) Move the Control Switch to the “ICE” position.

1 2 ... 16 17 18 19 20 21 22

No comments

Hoshizaki KM-101BAH User Manual Page 21