Hoshizaki Low-Profile Modular Crescent Cuber MRH User Manual download pdf (Page 13)

• Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the

fan blade (if applicable) turns freely.

• Check that the compressor is snug on all mounting pads.

• The icemaker can be installed on a dispenser unit or ice storage bin. The ice storage

bins listed below are recommended.

Model Number Bin Width Recommended Hoshizaki Ice Storage Bin

KML-250M_H

KML-351M_H

KML-451M_H

KML-631M_H

30" or Wider B-500 Series

For further options, contact your local Hoshizaki distributor.

• NOTICE! Remote model must be connected to an appropriate remote condenser

unit. The remote condenser unit listed below is recommended. Connection to a

different remote condenser unit will void the warranty unless Hoshizaki approves

a different remote condenser unit for your specic application. For further

details, contact your local Hoshizaki distributor.

Model Number Recommended Hoshizaki Remote Condenser Unit

KML-631MRH URC-9F

C. How to Remove Panels

See Fig. 1

• Front Panel: Remove the screw. Lift up and towards you.

• Top Panel: Lift up at front slightly, push rearward, and lift off.

• Right Side Panel: Remove the screw. Slide forward slightly and lift off.

• Front Insulation Panel: Lift up slightly, and pull towards you.

• Top Insulation Panel: Lift off.

Fig. 1

Top Panel

Front Insulation Panel

Front

Panel

Screw

Right Side Panel

Top Insulation Panel

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Hoshizaki Low-Profile Modular Crescent Cuber MRH User Manual Page 13