Hoshizaki KM-260BAH User Manual download pdf (Page 58)

Fig. 5

Remove Expansion

Valve Cover ﬁ rst

Cut ties to make Bulb

removable

Bulb Insulation Hose

Expansion Valve

Bulb

7. AIR-COOLED CONDENSER

CAUTION

1. Always install a new drier every time the sealed refrigeration system is

opened.

2. Do not replace the drier until after all other repair or replacement has

been made. Install the new drier with the arrow on the drier in the

direction of the refrigerant ﬂ ow.

3. When brazing, protect the drier by using a wet cloth to prevent the drier

from overheating. Do not allow the drier to exceed 250°F (121°C).

1) Unplug the icemaker or disconnect the power source.

2) Remove the panels.

3) Recover the refrigerant and store it in an approved container.

4) Disconnect the condenser inlet and outlet piping.

5) Remove the fan motor bracket from the condenser.

6) Remove the screws securing the condenser assembly, then remove the assembly.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 80 81

No comments

Hoshizaki KM-260BAH User Manual Page 58