Hoshizaki KML "F" SERIES User Manual download pdf (Page 39)

[d] CONTROLS AND ADJUSTMENTS

The Dip Switch is factory-adjusted to the following positions:

FOR MODELS WITH THERMOSTAT:

Switch Nos. 1 and 2:

Used for adjustment of the Defrost Timer.

The Defrost Timer starts counting when the Thermistor reads a certain temperature

at the Evaporator outlet.

Switch Nos. 3 and 4:

Used for adjustment of the Drain Timer.

When a freeze cycle is completed, the Pump Motor stops, and the icemaker

resumes operation in 2 seconds. Then the Pump Motor drains the Water Tank

for the time determined by the Drain Timer. The Drain Timer also determines the

time to restrain completion of a defrost cycle, i.e. the minimum defrost time.

Switch Nos. 5 and 6:

Used for adjustment of the Drain Counter.

The Pump Motor drains the Water Tank at the frequency determined by the Drain

Counter.

FOR MODELS WITH MECHANICAL BIN CONTROL:

DIP SWITCH NO. 1 2 3 4 5 6 7 8 9 10

KML-250 MAH OFF OFF OFF ON ON ON OFF OFF ON OFF

KML-250 MWH OFF OFF OFF ON ON ON OFF OFF OFF ON

350M_F, 350M_H OFF OFF OFF ON ON ON OFF OFF OFF ON

KML-450M_F, M_H

KML-600MAF, MAH

KML-600MWF, MWH

OFF OFF OFF OFF ON ON OFF OFF OFF ON

KML-600MRF, MRH ON OFF OFF OFF ON ON OFF OFF OFF ON

DIP SWITCH NO. 1 2 3 4 5 6 7 8 9 10

KML-250 MAH OFF OFF OFF ON ON ON ON OFF ON OFF

KML-250 MWH OFF OFF OFF ON ON ON ON OFF OFF ON

350M_F, 350M_H OFF OFF OFF ON ON ON ON OFF OFF ON

KML-450M_F, M_H

KML-600MAF, MAH

KML-600MWF, MWH

OFF OFF OFF OFF ON ON ON OFF OFF ON

KML-600MRF, MRH ON OFF OFF OFF ON ON ON OFF OFF ON

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 108 109

No comments

Hoshizaki KML "F" SERIES User Manual Page 39