Hoshizaki KML "F" SERIES User Manual download pdf (Page 104)

104

VI. MAINTENANCE AND CLEANING INSTRUCTIONS

IMPORTANT

Ensure all components, fasteners and thumbscrews are securely in place after

any maintenance or cleaning is done to the equipment.

1. PREPARING THE ICEMAKER FOR LONG STORAGE

WARNING

When shutting off the icemaker for an extended time, drain out all water from

the water tank and remove the ice from the Storage Bin. The

Storage Bin should be cleaned and dried. Drain the icemaker to prevent

damage to the water supply line at sub-freezing temperatures, using air or

carbon dioxide. Shut off the icemaker until the proper ambient temperature

is resumed.

• When the icemaker is not used for two or three days, it is sufficient to only move the

Control Switch to the “OFF” position, unless the icemaker will be at sub-freezing

temperatures.

[1] On water-cooled model only, first remove the water from the water-cooled condenser:

1) Turn off the power supply.

2) Remove the Front Panel.

3) Move the Control Switch, on the Control Box, to the “OFF” position.

4) Wait 3 minutes.

5) Move the Control Switch to the “ICE” position.

6) Replace the Front Panel and turn on the power supply.

7) Allow 5 minutes for the icemaker to fill with water and the Water Pump to start

operating.

8) Close the Water-cooled Condenser Water Supply Line Shut-off Valve.

9) Open the Drain Valve for the water-cooled condenser water supply line.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109

No comments

Hoshizaki KML "F" SERIES User Manual Page 104