Hoshizaki KM-2400SRH3 User Manual download pdf (Page 17)

DIP SWITCH NO. 1 2 3 4 5 6 7 8 9 10

OFF OFF ON OFF OFF OFF OFF OFF OFF ON

[d] CONTROLS AND ADJUSTMENTS

The Dip Switch is factory-adjusted to the following positions:

Switch Nos. 1 and 2:

Used for adjustment of the Defrost Timer.

The Defrost Timer starts counting when the Thermistor reads a certain temperature

at the Evaporator outlet.

Switch Nos. 3 and 4:

Used for adjustment of the Drain Timer.

When a freeze cycle is completed, the Pump Motor stops, and the icemaker

resumes operation in 2 seconds. Then the Pump Motor drains the Water Tank

for the time determined by the Drain Timer. The Drain Timer also determines the

time to restrain completion of a defrost cycle, i.e. the minimum defrost time.

Switch Nos. 5 and 6:

Used for adjustment of the Drain Counter.

The Pump Motor drains the Water Tank at the frequency determined by the Drain

Counter.

Switch Nos. 7 and 8:

Used only for checking the Controller Board. Usually set in OFF position.

Switch Nos. 9 and 10:

Used for adjustment of Freeze Timer.

The Freeze Timer determines maximum

freeze cycle time. Upon termination of

Freeze Timer, machine initiates the

harvest cycle. After 2 consecutive timer

terminations, machine will shut down,

possibly indicating a problem.

KM-2400SRF3

KM-2400SRH3

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

No comments

Hoshizaki KM-2400SRH3 User Manual Page 17