Hoshizaki F-300BAF User Manual download pdf (Page 45)

VI. Cleaning and Maintenance

IMPORTANT

Ensure all components, fasteners and thumbscrews are securely in place after

any maintenance or cleaning is done to the equipment.

A. Cleaning and Sanitizing Instructions

WARNING

1. HOSHIZAKI recommends cleaning this unit at least once a year. More

frequent cleaning, however, may be required in some existing water

conditions.

2. To prevent injury to individuals and damage to the icemaker, do not use

ammonia type cleaners.

3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing

solutions from coming into contact with skin.

1. Cleaning Solution

Dilute 4.8 ﬂ. oz. (142 ml) of recommended cleaner Hoshizaki "Scale Away" or

"LIME-A-WAY" (Economics Laboratory, Inc.) with 0.8 gallons (3 l) of warm water. This is

a minimum amount. Make more solution if necessary.

IMPORTANT

For safety and maximum effectiveness, use the solution immediately after

dilution.

2. Cleaning Procedure

1) Unplug the unit from the electrical outlet then remove the front panel and the top panel.

2) Close the water supply line shut-off valve.

3) Remove all ice from the storage bin.

4) Move the ﬂush switch to the "FLUSH" position.

5) Plug the unit back in and turn on the power

supply and drain out all water from the

water line.

6) Turn off the power supply.

Note: This unit is designed to start operating when the

reservoir is ﬁlled with water.

7) In the storage bin, remove the thumbscrews attaching spout (B), then remove spout (B)

and spout packing (B). See Fig. 3.

Thumbscrews

Spout (B)

Spout Packing (B)

Fig. 3

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

No comments

Hoshizaki F-300BAF User Manual Page 45