Hoshizaki DT-400BAH-OS User Manual download pdf (Page 6)

II. Installation and Operating Instructions

A. Checks Before Installation

IMPORTANT

1. Install in accordance with all applicable national, state, and local regulations.

2. Ensure all components, fasteners, and thumbscrews are securely in place

after installation.

3. Remove the shipping carton, tape, and packing material. If any are left in the

icemaker, it will not work properly.

1) Remove the panels to prevent damage when installing the icemaker. See "II.B. How to

Remove Panels."

2) Remove the package containing the accessories.

3) Remove the protective plastic lm from the panels. If the icemaker is exposed to the

sun or to heat, remove the lm after the icemaker cools.

4) Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the

fan blade turns freely.

5) Check that the compressor is snug on all mounting pads.

6) See the nameplate on the rear panel, and check that your voltage supplied corresponds

with the voltage specied on the nameplate.

B. How to Remove Panels

See Fig. 1

• Upper Front Panel: Remove the screw. Lift up and towards you.

• Top Panel: Remove the thumbscrew. Lift up

at front slightly, push rearward and lift off.

• Apron Panel: Remove the screws and pull

towards you.

• Side Panel: Remove the screws. Slide

forward slightly, and lift off.

• Lower Front Panel: Remove the screw and

pull towards you.

Fig. 1

Apron Panel

Side Panel

Upper Front Panel

Side Panel

Top Panel

Lower Front Panel

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

No comments

Hoshizaki DT-400BAH-OS User Manual Page 6